|By Business Wire||
|August 8, 2012 10:01 AM EDT||
Rapid7, the leading provider of security risk intelligence solutions, today announced that the new version of its vulnerability management solution, Rapid7® Nexpose, introduces features for discovering and scanning IPv6 assets that organizations may not even know they have. The new version also further reduces the signal-to-noise ratio of assessing security risk by filtering out unnecessary background noise that makes it hard for security professionals to identify and focus on the highest priority security issues. These features simplify vulnerability management for busy security professionals who must address hugely complex security challenges on a daily basis.
“Security professionals are overwhelmed by information. It’s increasingly complex for them to even identify what assets the organization has, let alone associated threats and the steps needed to improve their security posture,” said Richard Perkett, vice president of Engineering at Rapid7. “Rapid7 simplifies this process by pioneering dynamic discovery of assets that are otherwise hard to track, such as IPv6 and virtual assets. Combined with Nexpose’s remediation prioritization and vulnerability filtering, the result is efficiency in identifying the threats and actions that will make a real difference to the organization’s security posture, thereby increasing the credibility of security teams across the organization.”
Discovery and Scanning for IPv6
Approximately 95% of IPv4 address space has already been allocated1 and with devices increasingly requiring one or many IPs, the transition to the next generation, IPv6, is not far off. In fact, while most organizations believe they are not yet deploying IPv6, many devices are enabled for it by default. This represents a significant risk due to a number of factors, starting with a lack of IPv6 readiness in security products. Meanwhile, attackers are starting to recognize the opportunities in IPv6 as an attack vector and can tunnel in through IPv4 devices to then exploit the IPv6 vulnerabilities currently not being identified and addressed.
This threat is amplified by the difficulty that security professionals encounter in finding IPv6 assets in existing IPv4 production environments. The new edition of Nexpose addresses this by dynamically discovering IPv6 and IPv4 assets and scanning both for vulnerabilities. With Nexpose you can:
- Perform an IPv6 discovery over an IPv4 network, thereby enabling organizations to disable IPv6 devices in IPv4 networks as they could present a potential security risk
- Create a dynamic asset group and find assets with known IPv4 addresses that also have previously undiscovered IPv6 addresses, creating significant efficiencies by automating traditionally manual processes
- Run a report to show IPv6 enabled devices
- Conduct a scan to discover vulnerabilities in these IPv6 devices
- Export data to Metasploit and then run a risk assessment to validate risk based on exploits
“Nexpose can easily discover and scan IPv6 assets even if users don’t think IPv6 is relevant to them yet. The solution works directly from the user’s IPv4 environment to help them assess whether they have any IPv6 devices, for example, routers that are enabled by default, and if they have any relevant vulnerabilities,” explained Perkett.
Vulnerability Filtering to Reduce Signal-to-Noise Ratio
One of the hardest challenges security professionals face is discerning which “signals” they really need to listen to amongst all the “noise” they hear. In the case of vulnerability scanning, it is common for security professionals to receive reports of tens, if not hundreds, of thousands of vulnerabilities. Identifying which of these are the most critical and should be addressed first is a complex challenge. Nexpose already simplifies this by providing contextual risk information based on exploit exposure, malware exposure, malware kits and the age of vulnerabilities identified, all of which impact the risk factor. Rather than providing generic advice on what vulnerabilities should be patched, it specifically prescribes steps on what needs to be remediated or mitigated based on the specific environment.
With the new version of Nexpose, Rapid7 provides the industry’s most comprehensive capabilities for reducing the signal-to-noise ratio for vulnerability management. Users can now also filter asset and vulnerability information into groups that make sense to the organization and its structure. This enables users to produce reports with a sharper focus on specific security issues, giving remediation teams the exact information they need to do their jobs and eliminate the “noise” of extraneous vulnerability data. For example, users can generate reports that only include Adobe vulnerabilities. Likewise, users can exclude certain categories, such as for a particular platform or service for which they have a patch program in place. Being able to tailor the information for their audience in this way increases the credibility and relevance of security teams, promoting greater collaboration with IT operations.
Nexpose now enables users to filter vulnerabilities into 145 key “signal” categories, including:
- Vendor vulnerabilities: Adobe, Apple, Microsoft
- Web: Apache, IIS, OWASP Top 10, PHP, XSS, SQL Injection, Browsers
- Operating Systems: Microsoft Windows, Linux, Mac OS X
- Databases: Oracle, Microsoft SQL Server, MySQL
- Desktop Attack Vectors: Adobe Reader, Acrobat, Quicktime, Browsers, Flash, Java
“Organizations are drinking from the firehose at the moment, and many may feel like they’re drowning. The huge reports they have to wrestle with are a roadblock to productivity, and handing them off to IT operations for remediation hardly promotes a healthy collaborative relationship,” said Perkett. “With Nexpose, users can quickly determine which vulnerabilities are more relevant than others, filtering out a lot of the noise. The reports they give IT operations can be tailored to reflect the organization’s internal structure, so they are relevant and straight-to-the-point, increasing efficiency all round.”
Pricing and Availability
Rapid7 is the leading provider of security risk intelligence. Its integrated vulnerability management and penetration testing products, Nexpose and Metasploit, empower organizations to obtain accurate, actionable and contextual intelligence into their threat and risk posture. Rapid7's solutions are used by more than 2,000 enterprises and government agencies in more than 65 countries, while the Company's free products are downloaded more than one million times per year and enhanced by the more than 175,000 members of its open source security community. Rapid7 has been recognized as one of the fastest growing security companies by Inc. Magazine and as a "Top Place to Work" by the Boston Globe. Its products are top rated by Gartner®, Forrester® and SC Magazine. The Company is backed by Bain Capital Ventures and Technology Crossover Ventures. For more information about Rapid7, please visit http://www.rapid7.com.
About Rapid7 Nexpose
Nexpose proactively supports the entire vulnerability management lifecycle, including discovery, detection, verification, risk classification, impact analysis, reporting and mitigation. This gives organizations immediate insight into the security posture of their IT environment by conducting over 92,000 vulnerability checks for more than 31,800 vulnerabilities. The solution leverages one of the largest vulnerabilities databases to identify vulnerabilities across networks, operating systems, databases, Web applications and virtual assets. Risk is classified based on real exploit intelligence combined with industry standard metrics such as CVSS, as well as temporal and weighted risk scoring. Nexpose provides a detailed, sequenced remediation roadmap with time estimates for each task. Nexpose is used to help organizations improve their overall risk posture and security readiness as well as to comply with mandatory regulations, including security requirements for PCI, HIPAA, ARRA HITECH ACT, FISMA (including SCAP, USGCB, FDCC and CyberScope Compliance), Sarbanes-Oxley (SOX) and NERC CIP. Nexpose is a Common Criteria EAL3+ product and received the SC Magazine Vulnerability Assessment Tool of the Year Award in 2012.
1 Approximately 95% of IPv4 address space was already allocated as of Sept. 3, 2010, according to the American Registry for Internet Numbers, which delegates blocks of IPv4 and IPv6 addresses to carriers and enterprises in North America.
Internet of @ThingsExpo has announced today that Chris Matthieu has been named tech chair of Internet of @ThingsExpo 2017 New York The 7th Internet of @ThingsExpo will take place on June 6-8, 2017, at the Javits Center in New York City, New York. Chris Matthieu is the co-founder and CTO of Octoblu, a revolutionary real-time IoT platform recently acquired by Citrix. Octoblu connects things, systems, people and clouds to a global mesh network allowing users to automate and control design flo...
Dec. 9, 2016 06:00 AM EST Reads: 818
The WebRTC Summit New York, to be held June 6-8, 2017, at the Javits Center in New York City, NY, announces that its Call for Papers is now open. Topics include all aspects of improving IT delivery by eliminating waste through automated business models leveraging cloud technologies. WebRTC Summit is co-located with 20th International Cloud Expo and @ThingsExpo. WebRTC is the future of browser-to-browser communications, and continues to make inroads into the traditional, difficult, plug-in web co...
Dec. 9, 2016 04:15 AM EST Reads: 1,450
Amazon has gradually rolled out parts of its IoT offerings, but these are just the tip of the iceberg. In addition to optimizing their backend AWS offerings, Amazon is laying the ground work to be a major force in IoT - especially in the connected home and office. In his session at @ThingsExpo, Chris Kocher, founder and managing director of Grey Heron, explained how Amazon is extending its reach to become a major force in IoT by building on its dominant cloud IoT platform, its Dash Button strat...
Dec. 9, 2016 04:00 AM EST Reads: 6,342
Complete Internet of Things (IoT) embedded device security is not just about the device but involves the entire product’s identity, data and control integrity, and services traversing the cloud. A device can no longer be looked at as an island; it is a part of a system. In fact, given the cross-domain interactions enabled by IoT it could be a part of many systems. Also, depending on where the device is deployed, for example, in the office building versus a factory floor or oil field, security ha...
Dec. 9, 2016 03:00 AM EST Reads: 395
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
Dec. 9, 2016 02:15 AM EST Reads: 6,234
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
Dec. 9, 2016 02:00 AM EST Reads: 3,059
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at 20th Cloud Expo, Ed Featherston, director/senior enterprise architect at Collaborative Consulting, will discuss the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
Dec. 9, 2016 01:15 AM EST Reads: 1,665
In his general session at 19th Cloud Expo, Manish Dixit, VP of Product and Engineering at Dice, discussed how Dice leverages data insights and tools to help both tech professionals and recruiters better understand how skills relate to each other and which skills are in high demand using interactive visualizations and salary indicator tools to maximize earning potential. Manish Dixit is VP of Product and Engineering at Dice. As the leader of the Product, Engineering and Data Sciences team at D...
Dec. 9, 2016 12:45 AM EST Reads: 1,214
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2017 New York. The 20th Cloud Expo and 7th @ThingsExpo will take place on June 6-8, 2017, at the Javits Center in New York City, NY. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Internet to enable us all to im...
Dec. 9, 2016 12:30 AM EST Reads: 896
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
Dec. 9, 2016 12:00 AM EST Reads: 719
"Once customers get a year into their IoT deployments, they start to realize that they may have been shortsighted in the ways they built out their deployment and the key thing I see a lot of people looking at is - how can I take equipment data, pull it back in an IoT solution and show it in a dashboard," stated Dave McCarthy, Director of Products at Bsquare Corporation, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 8, 2016 09:45 PM EST Reads: 1,249
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
Dec. 8, 2016 09:15 PM EST Reads: 975
Everyone knows that truly innovative companies learn as they go along, pushing boundaries in response to market changes and demands. What's more of a mystery is how to balance innovation on a fresh platform built from scratch with the legacy tech stack, product suite and customers that continue to serve as the business' foundation. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, discussed why and how ReadyTalk diverted from healthy revenue and mor...
Dec. 8, 2016 05:45 PM EST Reads: 1,735
As data explodes in quantity, importance and from new sources, the need for managing and protecting data residing across physical, virtual, and cloud environments grow with it. Managing data includes protecting it, indexing and classifying it for true, long-term management, compliance and E-Discovery. Commvault can ensure this with a single pane of glass solution – whether in a private cloud, a Service Provider delivered public cloud or a hybrid cloud environment – across the heterogeneous enter...
Dec. 8, 2016 05:00 PM EST Reads: 1,827
Financial Technology has become a topic of intense interest throughout the cloud developer and enterprise IT communities. Accordingly, attendees at the upcoming 20th Cloud Expo at the Javits Center in New York, June 6-8, 2017, will find fresh new content in a new track called FinTech.
Dec. 8, 2016 04:45 PM EST Reads: 2,262
You have great SaaS business app ideas. You want to turn your idea quickly into a functional and engaging proof of concept. You need to be able to modify it to meet customers' needs, and you need to deliver a complete and secure SaaS application. How could you achieve all the above and yet avoid unforeseen IT requirements that add unnecessary cost and complexity? You also want your app to be responsive in any device at any time. In his session at 19th Cloud Expo, Mark Allen, General Manager of...
Dec. 8, 2016 04:45 PM EST Reads: 1,861
The 20th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held June 6-8, 2017, at the Javits Center in New York City, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Containers, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportunity. Submit your speaking proposal ...
Dec. 8, 2016 04:15 PM EST Reads: 2,326
Bert Loomis was a visionary. This general session will highlight how Bert Loomis and people like him inspire us to build great things with small inventions. In their general session at 19th Cloud Expo, Harold Hannon, Architect at IBM Bluemix, and Michael O'Neill, Strategic Business Development at Nvidia, discussed the accelerating pace of AI development and how IBM Cloud and NVIDIA are partnering to bring AI capabilities to "every day," on-demand. They also reviewed two "free infrastructure" pr...
Dec. 8, 2016 03:30 PM EST Reads: 1,258
Unsecured IoT devices were used to launch crippling DDOS attacks in October 2016, targeting services such as Twitter, Spotify, and GitHub. Subsequent testimony to Congress about potential attacks on office buildings, schools, and hospitals raised the possibility for the IoT to harm and even kill people. What should be done? Does the government need to intervene? This panel at @ThingExpo New York brings together leading IoT and security experts to discuss this very serious topic.
Dec. 8, 2016 03:00 PM EST Reads: 540
More and more brands have jumped on the IoT bandwagon. We have an excess of wearables – activity trackers, smartwatches, smart glasses and sneakers, and more that track seemingly endless datapoints. However, most consumers have no idea what “IoT” means. Creating more wearables that track data shouldn't be the aim of brands; delivering meaningful, tangible relevance to their users should be. We're in a period in which the IoT pendulum is still swinging. Initially, it swung toward "smart for smar...
Dec. 8, 2016 02:30 PM EST Reads: 962