|By Marketwired .||
|January 7, 2013 11:11 AM EST||
DALLAS, TX--(Marketwire - January 07, 2013) - Unmanned Innovation, a leading provider of Development Platforms for unmanned aircraft systems (UAS), announced that it has partnered with VectorNav Technologies to integrate VectorNav's VN-100 inertial measurement unit (IMU) into its os-Series Autopilots. Unmanned Innovation's os-Series Autopilots offer a customizable solution that enables rapid prototyping and cost-effective production of fixed-wing, helicopter, multi-rotor, and custom configuration UAS. Unmanned Innovation has integrated VectorNav's VN-100 miniature, calibrated MEMS-based, surface-mount IMU to provide customers the option of a fully calibrated and thoroughly tested IMU.
Unmanned Innovation's os-Series Autopilots, made commercially available for the first time in November 2012, combine modular hardware with an open architecture, making each autopilot a Development Platform. The os-Series Autopilots are offered in multiple form factors with features tailored for various vehicles, payloads, and applications. Each os-Series Autopilot is a complete integrated solution and contains an INS/GPS with air data incorporating the VectorNav VN-100, a datalink radio, payload interfaces, and a Linux computer within one miniature package; starting at just 32 grams. The os-Series Autopilots come with professionally written flight control and mission software which Unmanned Innovation provides under a royalty-free license that allows for easy modification, extension, and inclusion in proprietary products.
The partnership between the two companies began during AUVSI's Unmanned Systems North America 2012 conference in August, where Unmanned Innovation was introduced to VectorNav's VN-100 and recognized it as an attractive alternative to their existing inertial measurement sensors due to its small form factor, low-cost, and high-precision calibration. Unmanned Innovation's flexible architecture allowed for quick integration of the VN-100 and VectorNav provided custom firmware with a faster update rate to make the IMU compatible with Unmanned Innovation's requirements. The VN-100 IMU, calibrated for bias, scale factor and misalignment errors at room temperature or over the entire thermal operating range of the sensor increased the accuracy of the os-Series Autopilot navigation solution. After a short development cycle, testing and verification, VectorNav's VN-100 IMUs are now fully integrated within Unmanned Innovation's os-Series Autopilots. The complete os-Series product line is currently shipping to customers in the USA and abroad and is free of ITAR restrictions.
"We are very pleased to be working with Unmanned Innovation on their os-Series Autopilot, which we find to be a very unique and high-value product that fills a significant gap in this market," said John Brashear, VectorNav's President. "We hope that the VN-100 adds to this value by allowing Unmanned Innovation to focus on their strengths improving the os-Series while securing a long-term, dependable sensing solution and partnership with our company."
"We're very excited about working with VectorNav as their well calibrated hardware has added enhanced accuracy to our os-Series Autopilots," said Jonathan Downey, CEO of Unmanned Innovation.
About Unmanned Innovation:
Unmanned Innovation specializes in professional grade, customizable autopilots which act as Development Platforms for micro to mid-size fixed-wing, helicopter, multiple-rotor, and custom configuration UAS. Made commercially available in November 2012, Unmanned Innovation's os-Series Autopilots integrate hardware, tailored to specific needs, with an open architecture. This combination gives Unmanned Innovation's autopilots the flexibility to be used on both development and production aircraft platforms, enabling UAS manufacturers to rapidly develop diverse and innovative UAS for commercial and military applications, while creating and maintaining intellectual property.
About VectorNav Technologies:
VectorNav Technologies specializes in manufacturing high-performance navigation and inertial sensors using the latest miniature MEMS inertial sensor technology. Since its founding by five graduates of Texas A&M University in 2008, VectorNav has been providing customers worldwide access to high quality, fully calibrated inertial sensors with state-of-the-art digital filtering technology. With a strong background in aerospace engineering and experience in the development and testing of spacecraft, launch vehicles, and micro-aerial vehicles, VectorNav brings high performance aerospace filtering and calibration techniques into the world of low-cost industrial grade MEMS sensors, expanding the possibilities of today's MEMS sensor technology.
For further information on Unmanned Innovation and its os-Series Autopilots, please contact:
2901 W. Coast Highway, Suite 200
Newport Beach, CA 92663
E-mail: Email contact
For further information on VectorNav and its VN-100/VN-200 product line, please contact:
903 N. Bowser Rd., Suite 200
Richardson, TX 75081
E-mail: Email contact
Manufacturers are embracing the Industrial Internet the same way consumers are leveraging Fitbits – to improve overall health and wellness. Both can provide consistent measurement, visibility, and suggest performance improvements customized to help reach goals. Fitbit users can view real-time data and make adjustments to increase their activity. In his session at @ThingsExpo, Mark Bernardo Professional Services Leader, Americas, at GE Digital, will discuss how leveraging the Industrial Interne...
May. 3, 2016 02:00 PM EDT Reads: 1,166
The IETF draft standard for M2M certificates is a security solution specifically designed for the demanding needs of IoT/M2M applications. In his session at @ThingsExpo, Brian Romansky, VP of Strategic Technology at TrustPoint Innovation, will explain how M2M certificates can efficiently enable confidentiality, integrity, and authenticity on highly constrained devices.
May. 3, 2016 01:45 PM EDT Reads: 1,025
There is an ever-growing explosion of new devices that are connected to the Internet using “cloud” solutions. This rapid growth is creating a massive new demand for efficient access to data. And it’s not just about connecting to that data anymore. This new demand is bringing new issues and challenges and it is important for companies to scale for the coming growth. And with that scaling comes the need for greater security, gathering and data analysis, storage, connectivity and, of course, the...
May. 3, 2016 01:30 PM EDT Reads: 1,027
Increasing IoT connectivity is forcing enterprises to find elegant solutions to organize and visualize all incoming data from these connected devices with re-configurable dashboard widgets to effectively allow rapid decision-making for everything from immediate actions in tactical situations to strategic analysis and reporting. In his session at 18th Cloud Expo, Shikhir Singh, Senior Developer Relations Manager at Sencha, will discuss how to create HTML5 dashboards that interact with IoT devic...
May. 3, 2016 01:00 PM EDT Reads: 1,228
The increasing popularity of the Internet of Things necessitates that our physical and cognitive relationship with wearable technology will change rapidly in the near future. This advent means logging has become a thing of the past. Before, it was on us to track our own data, but now that data is automatically available. What does this mean for mHealth and the "connected" body? In her session at @ThingsExpo, Lisa Calkins, CEO and co-founder of Amadeus Consulting, will discuss the impact of wea...
May. 3, 2016 01:00 PM EDT Reads: 930
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
May. 3, 2016 12:30 PM EDT Reads: 1,154
SYS-CON Events announced today that Ericsson has been named “Gold Sponsor” of SYS-CON's @ThingsExpo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. Ericsson is a world leader in the rapidly changing environment of communications technology – providing equipment, software and services to enable transformation through mobility. Some 40 percent of global mobile traffic runs through networks we have supplied. More than 1 billion subscribers around the world re...
May. 3, 2016 12:30 PM EDT Reads: 1,219
You deployed your app with the Bluemix PaaS and it's gaining some serious traction, so it's time to make some tweaks. Did you design your application in a way that it can scale in the cloud? Were you even thinking about the cloud when you built the app? If not, chances are your app is going to break. Check out this webcast to learn various techniques for designing applications that will scale successfully in Bluemix, for the confidence you need to take your apps to the next level and beyond.
May. 3, 2016 12:15 PM EDT Reads: 1,579
SYS-CON Events announced today that Peak 10, Inc., a national IT infrastructure and cloud services provider, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Peak 10 provides reliable, tailored data center and network services, cloud and managed services. Its solutions are designed to scale and adapt to customers’ changing business needs, enabling them to lower costs, improve performance and focus inter...
May. 3, 2016 12:00 PM EDT Reads: 1,344
Artificial Intelligence has the potential to massively disrupt IoT. In his session at 18th Cloud Expo, AJ Abdallat, CEO of Beyond AI, will discuss what the five main drivers are in Artificial Intelligence that could shape the future of the Internet of Things. AJ Abdallat is CEO of Beyond AI. He has over 20 years of management experience in the fields of artificial intelligence, sensors, instruments, devices and software for telecommunications, life sciences, environmental monitoring, process...
May. 3, 2016 11:30 AM EDT Reads: 1,098
We’ve worked with dozens of early adopters across numerous industries and will debunk common misperceptions, which starts with understanding that many of the connected products we’ll use over the next 5 years are already products, they’re just not yet connected. With an IoT product, time-in-market provides much more essential feedback than ever before. Innovation comes from what you do with the data that the connected product provides in order to enhance the customer experience and optimize busi...
May. 3, 2016 11:00 AM EDT Reads: 1,149
The IoTs will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform. In his session at @ThingsExpo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm and share the must-have mindsets for removing complexity from the development proc...
May. 3, 2016 10:30 AM EDT Reads: 578
So, you bought into the current machine learning craze and went on to collect millions/billions of records from this promising new data source. Now, what do you do with them? Too often, the abundance of data quickly turns into an abundance of problems. How do you extract that "magic essence" from your data without falling into the common pitfalls? In her session at @ThingsExpo, Natalia Ponomareva, Software Engineer at Google, will provide tips on how to be successful in large scale machine lear...
May. 3, 2016 09:45 AM EDT Reads: 1,412
In his session at @ThingsExpo, Chris Klein, CEO and Co-founder of Rachio, will discuss next generation communities that are using IoT to create more sustainable, intelligent communities. One example is Sterling Ranch, a 10,000 home development that – with the help of Siemens – will integrate IoT technology into the community to provide residents with energy and water savings as well as intelligent security. Everything from stop lights to sprinkler systems to building infrastructures will run ef...
May. 3, 2016 08:30 AM EDT Reads: 1,119
You think you know what’s in your data. But do you? Most organizations are now aware of the business intelligence represented by their data. Data science stands to take this to a level you never thought of – literally. The techniques of data science, when used with the capabilities of Big Data technologies, can make connections you had not yet imagined, helping you discover new insights and ask new questions of your data. In his session at @ThingsExpo, Sarbjit Sarkaria, data science team lead ...
May. 3, 2016 07:00 AM EDT Reads: 1,069
SYS-CON Events announced today that Fusion, a leading provider of cloud services, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Fusion, a leading provider of integrated cloud solutions to small, medium and large businesses, is the industry's single source for the cloud. Fusion's advanced, proprietary cloud service platform enables the integration of leading edge solutions in the cloud, including cloud...
May. 2, 2016 10:00 AM EDT Reads: 2,679
Digital payments using wearable devices such as smart watches, fitness trackers, and payment wristbands are an increasing area of focus for industry participants, and consumer acceptance from early trials and deployments has encouraged some of the biggest names in technology and banking to continue their push to drive growth in this nascent market. Wearable payment systems may utilize near field communication (NFC), radio frequency identification (RFID), or quick response (QR) codes and barcodes...
May. 2, 2016 09:15 AM EDT Reads: 909
SYS-CON Events announced today that DatacenterDynamics has been named “Media Sponsor” of SYS-CON's 18th International Cloud Expo, which will take place on June 7–9, 2016, at the Javits Center in New York City, NY. DatacenterDynamics is a brand of DCD Group, a global B2B media and publishing company that develops products to help senior professionals in the world's most ICT dependent organizations make risk-based infrastructure and capacity decisions.
May. 2, 2016 06:30 AM EDT Reads: 2,565
The IoT has the potential to create a renaissance of manufacturing in the US and elsewhere. In his session at 18th Cloud Expo, Florent Solt, CTO and chief architect of Netvibes, will discuss how the expected exponential increase in the amount of data that will be processed, transported, stored, and accessed means there will be a huge demand for smart technologies to deliver it. Florent Solt is the CTO and chief architect of Netvibes. Prior to joining Netvibes in 2007, he co-founded Rift Technol...
May. 1, 2016 11:00 PM EDT Reads: 1,638
SYS-CON Events announced today that Stratoscale, the software company developing the next generation data center operating system, will exhibit at SYS-CON's 18th International Cloud Expo®, which will take place on June 7-9, 2016, at the Javits Center in New York City, NY. Stratoscale is revolutionizing the data center with a zero-to-cloud-in-minutes solution. With Stratoscale’s hardware-agnostic, Software Defined Data Center (SDDC) solution to store everything, run anything and scale everywhere...
May. 1, 2016 01:30 PM EDT Reads: 1,622