Welcome!

Linux Authors: Pat Romanski, Carmen Gonzalez, Elizabeth White, Victoria Livschitz, Ignacio M. Llorente

Related Topics: Cloud Expo, Java, Linux, Virtualization, Security, SDN Journal

Cloud Expo: Article

Why Intelligent VM Routing Is Critical to Your Private Cloud’s Success

Hosting decisions are far too important to be left to simplistic, best-efforts approaches

Virtualized and private cloud infrastructures are all about sharing resources - compute, storage and network. Optimizing these environments comes down to the ability to properly balance capacity supply and application demand. In practical terms, this means allocating the right amount of resources and putting workloads in the right places. These decisions are critical to ensuring performance, compliance and cost control.

Yet most organizations are using antiquated methods such as home-grown spreadsheets and best guesses to determine which infrastructure to host workloads on and how much capacity to allocate. Not only do these approaches hinder operational agility, but as hosting decisions become more and more complex, they are downright dangerous. The typical strategy employed to stave off risk is to over-provision infrastructure, and the thinking behind this is that having an excess of capacity on hand will ensure that enough resource is available to avoid any performance problems. This is not only expensive, but it actually doesn't prevent key operational issues and many of the performance and compliance issues that are caused by incorrectly combining workloads.

In essence, this management challenge is the same one faced by hotel operators. Hoteliers need to constantly align guest demands with hotel resources and amenities. A hotel could not operate without a reservation system to manage resource availability and match that with guest needs, and yet this is exactly how companies manage their virtual and internal cloud environments. Imagine if a hotel didn't have the operational control provided by their reservation system, and was constantly forced to build more rooms than necessary in order to meet "potential" guest demands, rather than basing their decision on an actual profile of historical and predicted demand. Or if they put clients in rooms without enough beds or required amenities. This should start sounding familiar to anyone who has managed a production virtual environment.

Hotels have had the luxury of a long history to refine their operations, and by using reservations systems to properly place guests and manage current and future bookings, they have gained a complete picture of available resources at any point in time. In doing so, they have optimized their ability to plan for and leverage available capacity, achieving the right balance between supply and demand.

Why Workload Routing and Reservations are Important
By applying the same principles used to manage a hotel's available capacity to their own operations, IT organizations can significantly reduce risk and cost while ensuring service levels in virtual and cloud infrastructures. There are five reasons why the process of workload routing and capacity reservation must become a core, automated component of IT planning and management:

1. Complexity of the Hosting Decision
Hosting decisions are all about optimally aligning supply with demand. However, this is very complex in modern infrastructures, where capabilities can vary widely, and the requirements of the workloads may have a significant impact on what can go where. To make the optimal decision, there are three important questions that must be asked:

  • Do the infrastructure capabilities satisfy the workload requirements? This is commonly referred to as "fit for purpose," and is required to determine whether the hosting environment is suitable for the kind of workload being hosted. This question has not always been top of mind in the past, as the typical process to deploy new applications has been to procure new infrastructure with very detailed specifications. But the increasing use of shared environments is changing this, and understanding the specifications of the currently running hosting environments is critical. Unfortunately, early virtual environments tended to be one-size-fits-all, and early internal clouds tended to focus on dev/test workloads, so fit for purpose decisions rarely extended beyond ensuring the environment has the right CPU architecture.
  • Will the workloads fit? While the fit for purpose analysis is concerned with whether a target environment has the right kind of capacity, this aspect of making hosting decisions is concerned with whether there is sufficient free capacity to host the workloads. This is a more traditional capacity problem, but with a twist, as virtual and cloud environments are by nature shared environments, and the capacity equation is multi-dimensional. Resources such as CPU, memory, disk, I/O, network I/O, storage capacity, etc., must be considered, as well as looking at the levels and patterns of activity to ensure that the new workloads are "dovetailing" with the existing ones. Furthermore, any analysis of capacity must also ensure that the workload will fit at the point in time it will be deployed and it must continue to fit beyond that time.
  • What is the relative cost? While fit and suitability are critical to where to host a workload, in a tiebreaker the main issue becomes relative cost. While many organizations are still not sophisticated enough to have an accurate chargeback model in place, a more precise way to determine cost may be to consider the relative cost of hosting a workload as a function of policy and placement.

2. Capacity Supply and Application Demand are Dynamic
Nothing stands still in virtualized IT environments, and any decisions must be made in the context of ever-changing technologies, hardware specs, service catalogs, application requirements and workloads. This is becoming even more prevalent in the age of the software-defined data center.

Because of this, capacity must be viewed as a pipeline, with inbound demands, inbound supply side capacity, outbound demands and decommissioned capacity all being part of the natural flow of activity. Handling this flow is a key to achieving agility, which is a goal in the current breed of virtual and cloud hosting infrastructure. The ability to efficiently react to changing needs is critical, and the lack of agility in legacy environments is really a reflection of the fact that previous approaches did not operate as a pipeline. If it currently takes two to three months to get capacity, then it is a clear indication that there is no pipeline in place.

3. Meeting Your Customers Expectations
Application owners today have expectations that capacity will be available when required, so it's necessary for IT to have a way to hold capacity for planned workload placements to be available on the date of deployment (like advance booking a hotel room).

Sometimes the concept of a capacity reservation is equated with the draw-down on a pool of resources or a quota that has been assigned to a consumer or internal group. This is dangerous, as it simply ensures that a specific amount of resources will not be exceeded, and does not guarantee that actual resources will be available. This is analogous to getting a coupon from a store that says "limit 10 per customer" - it in no way guarantees that there will be any product left on the shelf. Organizations should beware of these types of reservations, as they can give a false sense of security.

Capacity reservations are extremely useful to those managing the infrastructure capacity. They provide an accurate model of the pipeline of demand, which allows for much more efficient, accurate and timely purchasing decisions. Simply put, less idle capacity needs to be left on the floor. It also allows infrastructure to be managed as a portfolio, and if a certain mix of resources is needed to satisfy the overall supply and demand balance (such as buying servers with more memory), then procurement can factor this in.

4. Even Self-Service Needs Reservations
Self-service can create a highly volatile demand pipeline. But a bigger issue with self-service models is the way organizations perceive them. Many early cloud implementations focus on dev/test users or more grid-type workloads, and the entire approach to delivering capacity takes on a last-minute, unplanned flavor. But these are not the only kinds of workloads - or even the most common - and for a cloud to become a true "next-generation" hosting platform it must also support enterprise applications and proper release planning processes.

The heart of the issue is a tendency for organizations to equate self-service with instant provisioning. Although instant provisioning is useful for dev/test, grid and other horizontal scaling scenarios, it is not the only approach. For example, an online hotel reservation site provides self-service access to hotel rooms, but these rooms are not often being booked for that night. For business trips, conferences and even vacations, you book ahead. The same process must be put into place for hosting workloads.

Rather than narrowly defining self-service as the immediate provisioning of capacity, it is better to focus on the intelligent provisioning of capacity, which may or may not be immediate. For enterprise workloads with proper planning cycles and typical lead times, reservations are far more important than instant provisioning. And deciding where the application should be hosted in the first place is a solution critical decision that is often overlooked. Unless an organization has only one hosting environment, the importance (and difficulty) of this should not be underestimated.

5. Demand Is Global
There is a huge benefit to thinking big when it comes to making hosting decisions. The long-term trend will undoubtedly be to start thinking beyond the four walls of an organization and make broader hosting decisions that include external cloud providers, outsourcing models and other potential avenues of efficiency. But the use of external capacity is still a distant roadmap item in many IT organizations, and the current focus tends to be on making the best use of existing capacity and purchasing dollars.

Operating in scale also allows certain assumptions to be challenged, such as the requirement for an application to be hosted at a specific geographical location. Geographical constraints should be fully understood and properly identified, and not simply assumed based on past activity or server-hugging paranoia. Some workloads do have specific jurisdictional constraints, compliance requirements or latency sensitivities, but many have a significant amount of leeway in this regard, and to constrain them unnecessarily ties up expensive data center resources.

Unfortunately, the manual processes and spreadsheet-based approaches in use in many organizations are simply not capable of operating at the necessary scale, and cannot properly model the true requirements and constraints of a workload. This not only means that decisions are made in an overly narrow context, but that the decisions that are made are likely wrong.

Moving Past Your "Gut"
Hosting decisions are far too important to be left to simplistic, best-efforts approaches. Where a workload is placed and how resources are assigned to it is likely the most important factor in operational efficiency and safety, and is even more critical as organizations consider cloud hosting models. These decisions must be driven by the true requirements of the applications, the capabilities of the infrastructure, the policies in force and the pipeline of activity. They should be made in the context of the global picture, where all supply and demand can be considered and all hosting assumptions challenged. And they should be made in software, not brains, so they are repeatable, accurate and can drive automation.

More Stories By Andrew Hillier

Andrew Hillier is CTO and co-founder of CiRBA, Inc., a data center intelligence analytics software provider that determines optimal workload placements and resource allocations required to safely maximize the efficiency of Cloud, virtual and physical infrastructure. Reach Andrew at [email protected]

Comments (0)

Share your thoughts on this story.

Add your comment
You must be signed in to add a comment. Sign-in | Register

In accordance with our Comment Policy, we encourage comments that are on topic, relevant and to-the-point. We will remove comments that include profanity, personal attacks, racial slurs, threats of violence, or other inappropriate material that violates our Terms and Conditions, and will block users who make repeated violations. We ask all readers to expect diversity of opinion and to treat one another with dignity and respect.


@ThingsExpo Stories
Cultural, regulatory, environmental, political and economic (CREPE) conditions over the past decade are creating cross-industry solution spaces that require processes and technologies from both the Internet of Things (IoT), and Data Management and Analytics (DMA). These solution spaces are evolving into Sensor Analytics Ecosystems (SAE) that represent significant new opportunities for organizations of all types. Public Utilities throughout the world, providing electricity, natural gas and water, are pursuing SmartGrid initiatives that represent one of the more mature examples of SAE. We have s...
The security devil is always in the details of the attack: the ones you've endured, the ones you prepare yourself to fend off, and the ones that, you fear, will catch you completely unaware and defenseless. The Internet of Things (IoT) is nothing if not an endless proliferation of details. It's the vision of a world in which continuous Internet connectivity and addressability is embedded into a growing range of human artifacts, into the natural world, and even into our smartphones, appliances, and physical persons. In the IoT vision, every new "thing" - sensor, actuator, data source, data con...
How do APIs and IoT relate? The answer is not as simple as merely adding an API on top of a dumb device, but rather about understanding the architectural patterns for implementing an IoT fabric. There are typically two or three trends: Exposing the device to a management framework Exposing that management framework to a business centric logic Exposing that business layer and data to end users. This last trend is the IoT stack, which involves a new shift in the separation of what stuff happens, where data lives and where the interface lies. For instance, it's a mix of architectural styles ...
The 3rd International Internet of @ThingsExpo, co-located with the 16th International Cloud Expo - to be held June 9-11, 2015, at the Javits Center in New York City, NY - announces that its Call for Papers is now open. The Internet of Things (IoT) is the biggest idea since the creation of the Worldwide Web more than 20 years ago.
The Internet of Things is tied together with a thin strand that is known as time. Coincidentally, at the core of nearly all data analytics is a timestamp. When working with time series data there are a few core principles that everyone should consider, especially across datasets where time is the common boundary. In his session at Internet of @ThingsExpo, Jim Scott, Director of Enterprise Strategy & Architecture at MapR Technologies, discussed single-value, geo-spatial, and log time series data. By focusing on enterprise applications and the data center, he will use OpenTSDB as an example t...
An entirely new security model is needed for the Internet of Things, or is it? Can we save some old and tested controls for this new and different environment? In his session at @ThingsExpo, New York's at the Javits Center, Davi Ottenheimer, EMC Senior Director of Trust, reviewed hands-on lessons with IoT devices and reveal a new risk balance you might not expect. Davi Ottenheimer, EMC Senior Director of Trust, has more than nineteen years' experience managing global security operations and assessments, including a decade of leading incident response and digital forensics. He is co-author of t...
The Internet of Things will greatly expand the opportunities for data collection and new business models driven off of that data. In her session at @ThingsExpo, Esmeralda Swartz, CMO of MetraTech, discussed how for this to be effective you not only need to have infrastructure and operational models capable of utilizing this new phenomenon, but increasingly service providers will need to convince a skeptical public to participate. Get ready to show them the money!
The Internet of Things will put IT to its ultimate test by creating infinite new opportunities to digitize products and services, generate and analyze new data to improve customer satisfaction, and discover new ways to gain a competitive advantage across nearly every industry. In order to help corporate business units to capitalize on the rapidly evolving IoT opportunities, IT must stand up to a new set of challenges. In his session at @ThingsExpo, Jeff Kaplan, Managing Director of THINKstrategies, will examine why IT must finally fulfill its role in support of its SBUs or face a new round of...
One of the biggest challenges when developing connected devices is identifying user value and delivering it through successful user experiences. In his session at Internet of @ThingsExpo, Mike Kuniavsky, Principal Scientist, Innovation Services at PARC, described an IoT-specific approach to user experience design that combines approaches from interaction design, industrial design and service design to create experiences that go beyond simple connected gadgets to create lasting, multi-device experiences grounded in people's real needs and desires.
Enthusiasm for the Internet of Things has reached an all-time high. In 2013 alone, venture capitalists spent more than $1 billion dollars investing in the IoT space. With "smart" appliances and devices, IoT covers wearable smart devices, cloud services to hardware companies. Nest, a Google company, detects temperatures inside homes and automatically adjusts it by tracking its user's habit. These technologies are quickly developing and with it come challenges such as bridging infrastructure gaps, abiding by privacy concerns and making the concept a reality. These challenges can't be addressed w...
The Domain Name Service (DNS) is one of the most important components in networking infrastructure, enabling users and services to access applications by translating URLs (names) into IP addresses (numbers). Because every icon and URL and all embedded content on a website requires a DNS lookup loading complex sites necessitates hundreds of DNS queries. In addition, as more internet-enabled ‘Things' get connected, people will rely on DNS to name and find their fridges, toasters and toilets. According to a recent IDG Research Services Survey this rate of traffic will only grow. What's driving t...
Connected devices and the Internet of Things are getting significant momentum in 2014. In his session at Internet of @ThingsExpo, Jim Hunter, Chief Scientist & Technology Evangelist at Greenwave Systems, examined three key elements that together will drive mass adoption of the IoT before the end of 2015. The first element is the recent advent of robust open source protocols (like AllJoyn and WebRTC) that facilitate M2M communication. The second is broad availability of flexible, cost-effective storage designed to handle the massive surge in back-end data in a world where timely analytics is e...
Scott Jenson leads a project called The Physical Web within the Chrome team at Google. Project members are working to take the scalability and openness of the web and use it to talk to the exponentially exploding range of smart devices. Nearly every company today working on the IoT comes up with the same basic solution: use my server and you'll be fine. But if we really believe there will be trillions of these devices, that just can't scale. We need a system that is open a scalable and by using the URL as a basic building block, we open this up and get the same resilience that the web enjoys.
"Matrix is an ambitious open standard and implementation that's set up to break down the fragmentation problems that exist in IP messaging and VoIP communication," explained John Woolf, Technical Evangelist at Matrix, in this SYS-CON.tv interview at @ThingsExpo, held Nov 4–6, 2014, at the Santa Clara Convention Center in Santa Clara, CA.
We are reaching the end of the beginning with WebRTC, and real systems using this technology have begun to appear. One challenge that faces every WebRTC deployment (in some form or another) is identity management. For example, if you have an existing service – possibly built on a variety of different PaaS/SaaS offerings – and you want to add real-time communications you are faced with a challenge relating to user management, authentication, authorization, and validation. Service providers will want to use their existing identities, but these will have credentials already that are (hopefully) i...
P2P RTC will impact the landscape of communications, shifting from traditional telephony style communications models to OTT (Over-The-Top) cloud assisted & PaaS (Platform as a Service) communication services. The P2P shift will impact many areas of our lives, from mobile communication, human interactive web services, RTC and telephony infrastructure, user federation, security and privacy implications, business costs, and scalability. In his session at @ThingsExpo, Robin Raymond, Chief Architect at Hookflash, will walk through the shifting landscape of traditional telephone and voice services ...
Explosive growth in connected devices. Enormous amounts of data for collection and analysis. Critical use of data for split-second decision making and actionable information. All three are factors in making the Internet of Things a reality. Yet, any one factor would have an IT organization pondering its infrastructure strategy. How should your organization enhance its IT framework to enable an Internet of Things implementation? In his session at Internet of @ThingsExpo, James Kirkland, Chief Architect for the Internet of Things and Intelligent Systems at Red Hat, described how to revolutioniz...
Bit6 today issued a challenge to the technology community implementing Web Real Time Communication (WebRTC). To leap beyond WebRTC’s significant limitations and fully leverage its underlying value to accelerate innovation, application developers need to consider the entire communications ecosystem.
The definition of IoT is not new, in fact it’s been around for over a decade. What has changed is the public's awareness that the technology we use on a daily basis has caught up on the vision of an always on, always connected world. If you look into the details of what comprises the IoT, you’ll see that it includes everything from cloud computing, Big Data analytics, “Things,” Web communication, applications, network, storage, etc. It is essentially including everything connected online from hardware to software, or as we like to say, it’s an Internet of many different things. The difference ...
Cloud Expo 2014 TV commercials will feature @ThingsExpo, which was launched in June, 2014 at New York City's Javits Center as the largest 'Internet of Things' event in the world.