|By Roger Strukhoff||
|July 31, 2014 03:15 PM EDT||
It occurred to me, as I'm sure it's occurred to most of you, that driving a car is a classic example of the IoT in action. In this case, my brain is the CPU, and all of my car's gauges are the things.
I was making a routine 30-minute drive to raid a local vegetable stand. As I processed all the information coming in, I realized there were several dimensions to it. The same principle is at work with IoT projects, no matter what their scale.
One of the classic charts/concepts widely used in information management is determining urgency vs. importance. Urgent & important things are represented in the upper-right quadrant of a square, urgent but not important in the lower right, important but not urgent in the upper left, and that phone call from your old college friend asking for money in the not urgent and not important lower left.
Riding Along in My Automobile
In my car, my speedometer sends me a reading that is urgent and important. My gas gauge reading is not urgent but important, and becomes urgent and important once I start running low. My gearshift is important but not urgent.
My car has a tachometer but also an automatic transmission, so the tach reading is not urgent and not important. I can go down through the checklist of everything from the odometer, water temp, battery, and oil pressure, to the heating/AC settings, the radio; to the stream of other info and alerts kept by the car's computer.
It's Not That Simple
But this simple classification misses a lot of important stuff. For one thing, as I note above, much of the information changes its nature depending on conditions. Not only am I in trouble if I run out of gas, I'm in big trouble if any of the water, battery, or oil gauges changes. They seldom do, but if they do, they become red-flag urgent and important.
So an IoT monitoring & analytical architecture must take into account the changing, sometimes fluid nature of the dataflows.
It must also take into account frequency, consequences, remedies, and cost. Returning to the gas gauge, I need to look at it infrequently, the consequence is embarrassing but usually not life threatening, the remedy is generally easy, and the cost is not high. The speedometer, on the other hand, must be monitored in real time, whether I ignore it or not.
Should the engine throw a belt and cut my power while driving at night, the consequence is more severe, the remedy more difficult, and the cost higher. Should I ignore a low oil pressure warning, then I'm potentially getting into a dangerous, difficult, very costly situation.
I've had air conditioning systems conk out on me, something for which there is neither a gauge nor an alert. This problem is not urgent or important (as uncomfortable as driving without AC in the heat can be), has little consequence (unless you need to drive people somewhere who may be less tolerant of the heat than you), but can be very difficult and expensive to fix.
I've also had wheels fall of my car--twice. The first time was when I was 19 years old, driving a decrepit used car, and speeding down the road in the manner of many teenagers who think they're going to live forever. I missed slamming into a bridge by inches, but ended up merely on the side of the road with nobody hurt. I also slowed my driving down forever.
The second time I was going 5 miles per hour, and thought I had a flat tire. Even at this slow speed, the incident could have had very bad consequences. Losing control of the car is a terrifying thing. This car was not particularly old, but had these supremely annoying aluminum wheels that raise all sorts of Cain with tires and linkages. Again, no gauge here to help me out, but both times I was put in a potentially fatal situation.
The "gaugeless IoT" of AC & wheel failures exists in many other aspects of driving my car. For example, even though a thermometer courteously tells me how hot or cold it is outside--something I had already nailed down as I was walking out to my car--it doesn't have an anemometer. I have to know and gauge the effect of wind myself. It doesn't let me know about traffic jams ahead, flooding, or perhaps a tornado coming my way. It doesn't warn me of kids on bicycles or dogs or deer darting out in front of me, or big trucks suddenly crowding me. It doesn't predict any of the other thousands of examples of atrocious driving I've encountered with my fellow Americans.
But wait a minute, that's why I have eyes and ears. And memory, my own organic expert system.
So, So Early
This brings me to my overall point: Even as the IoT will generate trillions of dollars within the global economy very soon, we're still in the very early days. I'm tempted to say that we're only now in Act I of the Information Age. All previous progress has been mere prologue.
There's been a golden quest for decades to smarten computers up by attaching sensors to them. Sure, our wondrous machines have been able to crunch numbers better than us forever, and can perform all manner of brute-force tasks. Today they can even play a nice song or movie at a very high quality.
But the IoT will bring sensory to our systems in a big way for the first time. They will need to measure all the new incoming data in several dimensions, with built-in decision points that assess remedies and consequences. Even so, it will be decades before IoT applications can "see" and "hear" with anywhere near the ability of people. As always, let's not get too arrogant about the power of our machines, and remember that human beings are sometimes the weak link but sometimes the salvation of the systems we build.
I wanted to gather all of my Internet of Things (IOT) blogs into a single blog (that I could later use with my University of San Francisco (USF) Big Data “MBA” course). However as I started to pull these blogs together, I realized that my IOT discussion lacked a vision; it lacked an end point towards which an organization could drive their IOT envisioning, proof of value, app dev, data engineering and data science efforts. And I think that the IOT end point is really quite simple…
Jul. 23, 2016 06:15 PM EDT Reads: 755
With 15% of enterprises adopting a hybrid IT strategy, you need to set a plan to integrate hybrid cloud throughout your infrastructure. In his session at 18th Cloud Expo, Steven Dreher, Director of Solutions Architecture at Green House Data, discussed how to plan for shifting resource requirements, overcome challenges, and implement hybrid IT alongside your existing data center assets. Highlights included anticipating workload, cost and resource calculations, integrating services on both sides...
Jul. 23, 2016 06:00 PM EDT Reads: 1,853
"We are a well-established player in the application life cycle management market and we also have a very strong version control product," stated Flint Brenton, CEO of CollabNet,, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 05:30 PM EDT Reads: 1,703
The IoT has the potential to create a renaissance of manufacturing in the US and elsewhere. In his session at 18th Cloud Expo, Florent Solt, CTO and chief architect of Netvibes, discussed how the expected exponential increase in the amount of data that will be processed, transported, stored, and accessed means there will be a huge demand for smart technologies to deliver it. Florent Solt is the CTO and chief architect of Netvibes. Prior to joining Netvibes in 2007, he co-founded Rift Technologi...
Jul. 23, 2016 05:00 PM EDT Reads: 930
We're entering the post-smartphone era, where wearable gadgets from watches and fitness bands to glasses and health aids will power the next technological revolution. With mass adoption of wearable devices comes a new data ecosystem that must be protected. Wearables open new pathways that facilitate the tracking, sharing and storing of consumers’ personal health, location and daily activity data. Consumers have some idea of the data these devices capture, but most don’t realize how revealing and...
Jul. 23, 2016 04:00 PM EDT Reads: 1,964
Unless your company can spend a lot of money on new technology, re-engineering your environment and hiring a comprehensive cybersecurity team, you will most likely move to the cloud or seek external service partnerships. In his session at 18th Cloud Expo, Darren Guccione, CEO of Keeper Security, revealed what you need to know when it comes to encryption in the cloud.
Jul. 23, 2016 04:00 PM EDT Reads: 2,295
What are the successful IoT innovations from emerging markets? What are the unique challenges and opportunities from these markets? How did the constraints in connectivity among others lead to groundbreaking insights? In her session at @ThingsExpo, Carmen Feliciano, a Principal at AMDG, will answer all these questions and share how you can apply IoT best practices and frameworks from the emerging markets to your own business.
Jul. 23, 2016 03:45 PM EDT Reads: 1,493
Basho Technologies has announced the latest release of Basho Riak TS, version 1.3. Riak TS is an enterprise-grade NoSQL database optimized for Internet of Things (IoT). The open source version enables developers to download the software for free and use it in production as well as make contributions to the code and develop applications around Riak TS. Enhancements to Riak TS make it quick, easy and cost-effective to spin up an instance to test new ideas and build IoT applications. In addition to...
Jul. 23, 2016 03:30 PM EDT Reads: 1,831
You think you know what’s in your data. But do you? Most organizations are now aware of the business intelligence represented by their data. Data science stands to take this to a level you never thought of – literally. The techniques of data science, when used with the capabilities of Big Data technologies, can make connections you had not yet imagined, helping you discover new insights and ask new questions of your data. In his session at @ThingsExpo, Sarbjit Sarkaria, data science team lead ...
Jul. 23, 2016 03:15 PM EDT Reads: 795
Extracting business value from Internet of Things (IoT) data doesn’t happen overnight. There are several requirements that must be satisfied, including IoT device enablement, data analysis, real-time detection of complex events and automated orchestration of actions. Unfortunately, too many companies fall short in achieving their business goals by implementing incomplete solutions or not focusing on tangible use cases. In his general session at @ThingsExpo, Dave McCarthy, Director of Products...
Jul. 23, 2016 03:00 PM EDT Reads: 1,647
Ask someone to architect an Internet of Things (IoT) solution and you are guaranteed to see a reference to the cloud. This would lead you to believe that IoT requires the cloud to exist. However, there are many IoT use cases where the cloud is not feasible or desirable. In his session at @ThingsExpo, Dave McCarthy, Director of Products at Bsquare Corporation, will discuss the strategies that exist to extend intelligence directly to IoT devices and sensors, freeing them from the constraints of ...
Jul. 23, 2016 02:30 PM EDT Reads: 1,699
WebRTC is bringing significant change to the communications landscape that will bridge the worlds of web and telephony, making the Internet the new standard for communications. Cloud9 took the road less traveled and used WebRTC to create a downloadable enterprise-grade communications platform that is changing the communication dynamic in the financial sector. In his session at @ThingsExpo, Leo Papadopoulos, CTO of Cloud9, discussed the importance of WebRTC and how it enables companies to focus...
Jul. 23, 2016 02:15 PM EDT Reads: 623
The best-practices for building IoT applications with Go Code that attendees can use to build their own IoT applications. In his session at @ThingsExpo, Indraneel Mitra, Senior Solutions Architect & Technology Evangelist at Cognizant, provided valuable information and resources for both novice and experienced developers on how to get started with IoT and Golang in a day. He also provided information on how to use Intel Arduino Kit, Go Robotics API and AWS IoT stack to build an application tha...
Jul. 23, 2016 01:00 PM EDT Reads: 819
Is your aging software platform suffering from technical debt while the market changes and demands new solutions at a faster clip? It’s a bold move, but you might consider walking away from your core platform and starting fresh. ReadyTalk did exactly that. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, will discuss why and how ReadyTalk diverted from healthy revenue and over a decade of audio conferencing product development to start an innovati...
Jul. 23, 2016 12:00 PM EDT Reads: 836
With an estimated 50 billion devices connected to the Internet by 2020, several industries will begin to expand their capabilities for retaining end point data at the edge to better utilize the range of data types and sheer volume of M2M data generated by the Internet of Things. In his session at @ThingsExpo, Don DeLoach, CEO and President of Infobright, discussed the infrastructures businesses will need to implement to handle this explosion of data by providing specific use cases for filterin...
Jul. 23, 2016 12:00 PM EDT Reads: 1,127
Early adopters of IoT viewed it mainly as a different term for machine-to-machine connectivity or M2M. This is understandable since a prerequisite for any IoT solution is the ability to collect and aggregate device data, which is most often presented in a dashboard. The problem is that viewing data in a dashboard requires a human to interpret the results and take manual action, which doesn’t scale to the needs of IoT.
Jul. 23, 2016 11:00 AM EDT Reads: 1,819
So, you bought into the current machine learning craze and went on to collect millions/billions of records from this promising new data source. Now, what do you do with them? Too often, the abundance of data quickly turns into an abundance of problems. How do you extract that "magic essence" from your data without falling into the common pitfalls? In her session at @ThingsExpo, Natalia Ponomareva, Software Engineer at Google, provided tips on how to be successful in large scale machine learning...
Jul. 23, 2016 11:00 AM EDT Reads: 1,144
What does it look like when you have access to cloud infrastructure and platform under the same roof? Let’s talk about the different layers of Technology as a Service: who cares, what runs where, and how does it all fit together. In his session at 18th Cloud Expo, Phil Jackson, Lead Technology Evangelist at SoftLayer, an IBM company, spoke about the picture being painted by IBM Cloud and how the tools being crafted can help fill the gaps in your IT infrastructure.
Jul. 23, 2016 10:45 AM EDT Reads: 1,968
"C2M is our digital transformation and IoT platform. We've had C2M on the market for almost three years now and it has a comprehensive set of functionalities that it brings to the market," explained Mahesh Ramu, Vice President, IoT Strategy and Operations at Plasma, in this SYS-CON.tv interview at @ThingsExpo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 10:00 AM EDT Reads: 1,043
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
Jul. 23, 2016 10:00 AM EDT Reads: 1,919