Welcome!

Linux Containers Authors: Elizabeth White, Chris Colosimo, SmartBear Blog, XebiaLabs Blog, Yeshim Deniz

Related Topics: @DevOpsSummit, Linux Containers, Containers Expo Blog

@DevOpsSummit: Blog Feed Post

The Smoke and Mirrors of UX vs. Application Performance | @DevOpsSummit #DevOps #APM #Monitoring

Can a better UX simultaneously deliver a worse user experience?

The Smoke and Mirrors of UX vs. Application Performance
By Omed Habib

Can a better UX simultaneously deliver a worse user experience? It sounds like a paradox, but it may be more common than you think. It describes a category of UX design practices that have little to do with improving the actual experience and everything to do with suggesting that the experience is a good one.

The difference can be subtle, but true user experience improvement begins with precision application performance optimization that only an APM solution can provide. APM diagnoses the cause of a slowdown, allowing developers to address the root cause and not the surface symptoms. Ignoring the underlying performance bottlenecks and tricking the user with a UI bandaid is akin to placing tape over a crack in your drywall — you’re only covering up the symptom of an underlying problem. That’s the difference between improving the quality of the software and generating economic waste for short term gains.

Defining Perceived Performance
UX designers commonly deploy a set of techniques related to “perceived performance.” This is the

principle that the user’s perceptions about the app’s performance need to be managed. One real world example involves a test of loading screen animations for the mobile version of Facebook. The test demonstrated that users reported an improved perception of the app’s loading speed when developers changed the design of the loading animation.

As iOS developer, Rusty Mitchell reported, “A Facebook test indicating that when their users were presented with a custom loading animation in the Facebook iOS app, they blamed the app for the delay. But when users were shown the iOS system spinner, they were more likely to blame the system itself.”

Perceived performance techniques are part a larger trend in design beyond the world of software known as “benevolent deception.”

A Study of Benevolent Deception
In a report by Microsoft and university researchers, author Eytan Adar said his team found increasing use of “benevolent deception” in a range of software applications. Adar said that these deceptions arise from the stress of opposing market forces. While enterprise and consumer apps are growing more complex, users increasingly prefer apps with a simpler, more intuitive interface. The complexities must be simplified on the front end and deception is the most direct route.

Adar wrote, “We’re seeing the underlying systems become more complex and automated to the point where very few people understand how they work, but at the same time we want these invisible public-facing interfaces. The result is a growing gulf between the mental model (how the person thinks the thing works) and the system model (how it actually works). A bigger gulf means bigger tensions, and more and more situations where deception is used to resolve these gaps.”

Beyond Benevolent Deception
One step beyond benevolent deception is “volitional theater,” which refers to functions and displays that don’t correspond to the underlying processes. Outside the world of software defined businesses, you can see these techniques at work in the fact that elevator “Close Doors” buttons don’t do anything at all. They just give impatient riders something to do until the doors close on their own.

Pretty shocked? Yep, you better believe it.

The New York Times cited several other examples of volitional theater, such as the “Press to Walk” button on street corners. Remember all those times you kept the crosswalk pedestrian button to cross the street? You were most likely pushing a button designed to calm your nerves that didn’t have any actual impact on the timing of the street lights. Designers refer to non-operation controls as “placebo buttons.” They shorten the perceived wait time by distracting people with the imitation of control.

Three Types of Volitional Theater
Adar’s research identified three major trends in the way that volitional theater is being used in modern UX application design:

System Images Deception: Designed to reframe what the system is doing.

This category of deceptive UX includes “Sandboxing.” That’s where developers create a secondary system that operates in a way that’s different from a full application. The example Adar gave is the Windows Vista Speech Tutorial. This works as a separate program from the main speech recognition system. In reality, the tutorial is a “safe” version of the environment that was built to be less sensitive to mistakes to simplify the learning process.

Behavioral Deceptions: Designed to offer users the appearance of change.
This category goes back to the idea of placebo buttons. By giving users an “OK” or “Next” button, the system can smooth over performance delays. UX designers use a host of optical illusions and cinematographic techniques like blurring to suggest motion when nothing is happening on screen. Examples include pattern emergence, reification (fill-in-the-gaps), image multi-stability, and object invariance. These often cover over issues related to slow-performing software.

Mental Model Deceptions: Designed to give users a specific mental model about how the system operates.
Explainer videos may be the worst offenders in this category, since they apply dramatic and distracting metaphors in an attempt to engage distracted prospects. Many times, the more outlandish the model, the more memorable it is. These mental models help sales, but support teams then have to explain how things really work to frustrated customers. It also covers popular skeuomorphs, like the sound of non-existent static on Skype phone calls.

Better Practices in UX
Despite these trends, there are many developers who remain strongly opposed to benevolent deception and volitional theater. Some of their insights and arguments are presented on the Dark Patterns website.

These developers don’t feel that it’s ethical to trick the user or remove their freedom to know what’s going on with the software. Instead of masking issues, they feel that slowdowns or clunky design can and should be eliminated. What developers need to achieve that is a comprehensive monitoring solution that pinpoints the causes of latency. Then engineering teams can go in and make the necessary code and infrastructure optimization necessary for software to actually perform better. They consider volitional theater to be sloppy design. One way to start correcting those design flaws is by evaluating the software and corresponding infrastructure dependencies.

UX and Business Transactions
The first step in approaching application performance monitoring is identifying an entirely new unit of measuring the success of your applications. At AppDynamics, we’ve solved this by introducing the concept of a Business Transaction.

Imagine all the requests that are invoked across an entire distributed application ecosystem necessary to fulfill a specific request. For example, if a customer wants to “checkout” their shopping cart, they click the “Checkout” button. Upon that single click, a request is made from the browser through the internet to a web server, probably a front-end Node.js application which then calls an internal website, a database, and a caching layer. Each component within that call that’s invoked is responsible to fulfill that click, so we call the lifeline of that request a Business Transaction.

The Business Transaction perspective prioritizes the goals of the end user. What are your customers really trying to achieve? In the past, developers argued over whether application monitoring or network monitoring were more important. Here’s how an AppDynamics engineer reframed the problem:

“For me, users experience ‘Business Transactions’  — they don’t experience applications, infrastructure or networks. When a user complains, they normally say something like, ‘I can’t log in,’ or, ‘My checkout timed out.’ I can honestly say I’ve never heard them say, ‘The CPU utilization on your machine is too high,’ or, ‘I don’t think you have enough memory allocated. Now think about that from a monitoring perspective. Do most organizations today monitor business transactions, or do they monitor application infrastructure and networks? The truth is the latter, normally with several toolsets. So the question ‘Monitor the application or the network?’ is really the wrong question. Unless you monitor business transactions, you’re never going to understand what your end users actually experience.”

Starting from the business transactions will help DevOps teams view your system as a function of business processes vs. individual requests firing off everywhere. This is how you can start solving the problems that matter most to customers. It’s always better to diagnose and solve performance issues instead of merely covering them up or distracting the user with UX techniques.

Isolating Causes
This approach is much closer to approximating the true UX of an average user. Starting from the business transaction, you can use APM solutions to drill down from end user clients to application code-level details. That’s how you isolate the root cause of performance problems that matter most to specific users.

Of course, isolating the problem doesn’t matter unless you resolve it. We’ve discussed this with application teams who have isolated problems related to runtime exceptions for Java-based applications in production, but they tended to gloss over those that didn’t break the application.

That’s a mistake we addressed in a series about Top Application Performance Challenges. Bhaskar Sunkar, AppDynamics co-founder and CTO, concluded that, “Runtime Exceptions happen. When they occur frequently, they do appreciably slow down your application. The slowness becomes contagious to all transactions being served by the application. Don’t mute them. Don’t ignore them. Don’t dismiss them. Don’t convince yourself they are harmless. If you want a simple way to improve your application’s performance, start by fixing up these regular occurring exceptions. Who knows, you just might help everyone’s code run a little faster.”

This approach is becoming even more critical as smaller devices attempt to crunch higher volumes of data. A good example is how applications built for the Apple Watch are expected to provide the same level of performance as those built for a tablet or smartphone. Users don’t lower their expectations to compensate for processing power. In the end, users care about the benefits of the application, not the limitations of the device.

The Age of Experience
Gartner reported that 89 percent of companies expected to compete based on customer experience by 2017. However, customers want more from their software than just great UX. Beautiful design and clever tricks can’t distract these time-sensitive users from being very aware of application performance issues.

As data volumes accelerate and devices shrink, it will grow harder to maintain optimal performance and continuous improvement schedules. Applications teams need speed and precision tools to pinpoint areas for improvement. At the same time, more businesses are undergoing their own digital transformations and discovering the importance of performance management for the first time.

Developments in user hand movement recognition and motion control mapping have been accelerating along multiple fronts, such as VR best practices by Leap Motion and Google’s Project Soli, which uses micro-radar to precisely translate user intent by the most minute finger gestures. These advancements likely represent what’s coming next in terms of UX, but they will demand IT infrastructures with access to a great deal more data-processing power.

Drilling Down to Maximum Impact
Excellence in UX for the next generation of applications has to start by troubleshooting business transaction performance from the user’s point of view. From there, you’ll be able to drill down to the code level and intelligently capture the root cause that impacts the user.

Applications teams should be responsible for end-to-end analysis of the total UX, beyond just the relative health of the application and infrastructure nodes.

The post The Smoke and Mirrors of UX vs. Application Performance appeared first on Application Performance Monitoring Blog | AppDynamics.

Read the original blog entry...

More Stories By Jyoti Bansal

In high-production environments where release cycles are measured in hours or minutes — not days or weeks — there's little room for mistakes and no room for confusion. Everyone has to understand what's happening, in real time, and have the means to do whatever is necessary to keep applications up and running optimally.

DevOps is a high-stakes world, but done well, it delivers the agility and performance to significantly impact business competitiveness.

@ThingsExpo Stories
Apache Hadoop is emerging as a distributed platform for handling large and fast incoming streams of data. Predictive maintenance, supply chain optimization, and Internet-of-Things analysis are examples where Hadoop provides the scalable storage, processing, and analytics platform to gain meaningful insights from granular data that is typically only valuable from a large-scale, aggregate view. One architecture useful for capturing and analyzing streaming data is the Lambda Architecture, represent...
My team embarked on building a data lake for our sales and marketing data to better understand customer journeys. This required building a hybrid data pipeline to connect our cloud CRM with the new Hadoop Data Lake. One challenge is that IT was not in a position to provide support until we proved value and marketing did not have the experience, so we embarked on the journey ourselves within the product marketing team for our line of business within Progress. In his session at @BigDataExpo, Sum...
Things are changing so quickly in IoT that it would take a wizard to predict which ecosystem will gain the most traction. In order for IoT to reach its potential, smart devices must be able to work together. Today, there are a slew of interoperability standards being promoted by big names to make this happen: HomeKit, Brillo and Alljoyn. In his session at @ThingsExpo, Adam Justice, vice president and general manager of Grid Connect, will review what happens when smart devices don’t work togethe...
SYS-CON Events announced today that Ocean9will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Ocean9 provides cloud services for Backup, Disaster Recovery (DRaaS) and instant Innovation, and redefines enterprise infrastructure with its cloud native subscription offerings for mission critical SAP workloads.
In his session at @ThingsExpo, Eric Lachapelle, CEO of the Professional Evaluation and Certification Board (PECB), will provide an overview of various initiatives to certifiy the security of connected devices and future trends in ensuring public trust of IoT. Eric Lachapelle is the Chief Executive Officer of the Professional Evaluation and Certification Board (PECB), an international certification body. His role is to help companies and individuals to achieve professional, accredited and worldw...
SYS-CON Events announced today that Technologic Systems Inc., an embedded systems solutions company, will exhibit at SYS-CON's @ThingsExpo, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Technologic Systems is an embedded systems company with headquarters in Fountain Hills, Arizona. They have been in business for 32 years, helping more than 8,000 OEM customers and building over a hundred COTS products that have never been discontinued. Technologic Systems’ pr...
SYS-CON Events announced today that CA Technologies has been named “Platinum Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY, and the 21st International Cloud Expo®, which will take place October 31-November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. CA Technologies helps customers succeed in a future where every business – from apparel to energy – is being rewritten by software. From ...
The taxi industry never saw Uber coming. Startups are a threat to incumbents like never before, and a major enabler for startups is that they are instantly “cloud ready.” If innovation moves at the pace of IT, then your company is in trouble. Why? Because your data center will not keep up with frenetic pace AWS, Microsoft and Google are rolling out new capabilities In his session at 20th Cloud Expo, Don Browning, VP of Cloud Architecture at Turner, will posit that disruption is inevitable for c...
SYS-CON Events announced today that Cloudistics, an on-premises cloud computing company, has been named “Bronze Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Cloudistics delivers a complete public cloud experience with composable on-premises infrastructures to medium and large enterprises. Its software-defined technology natively converges network, storage, compute, virtualization, and management into a ...
Keeping pace with advancements in software delivery processes and tooling is taxing even for the most proficient organizations. Point tools, platforms, open source and the increasing adoption of private and public cloud services requires strong engineering rigor - all in the face of developer demands to use the tools of choice. As Agile has settled in as a mainstream practice, now DevOps has emerged as the next wave to improve software delivery speed and output. To make DevOps work, organization...
The explosion of new web/cloud/IoT-based applications and the data they generate are transforming our world right before our eyes. In this rush to adopt these new technologies, organizations are often ignoring fundamental questions concerning who owns the data and failing to ask for permission to conduct invasive surveillance of their customers. Organizations that are not transparent about how their systems gather data telemetry without offering shared data ownership risk product rejection, regu...
SYS-CON Events announced today that Loom Systems will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Founded in 2015, Loom Systems delivers an advanced AI solution to predict and prevent problems in the digital business. Loom stands alone in the industry as an AI analysis platform requiring no prior math knowledge from operators, leveraging the existing staff to succeed in the digital era. With offices in S...
SYS-CON Events announced today that Interoute, owner-operator of one of Europe's largest networks and a global cloud services platform, has been named “Bronze Sponsor” of SYS-CON's 20th Cloud Expo, which will take place on June 6-8, 2017 at the Javits Center in New York, New York. Interoute is the owner-operator of one of Europe's largest networks and a global cloud services platform which encompasses 12 data centers, 14 virtual data centers and 31 colocation centers, with connections to 195 add...
SYS-CON Events announced today that SoftLayer, an IBM Company, has been named “Gold Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. SoftLayer, an IBM Company, provides cloud infrastructure as a service from a growing number of data centers and network points of presence around the world. SoftLayer’s customers range from Web startups to global enterprises.
SYS-CON Events announced today that CrowdReviews.com has been named “Media Sponsor” of SYS-CON's 20th International Cloud Expo, which will take place on June 6–8, 2017, at the Javits Center in New York City, NY. CrowdReviews.com is a transparent online platform for determining which products and services are the best based on the opinion of the crowd. The crowd consists of Internet users that have experienced products and services first-hand and have an interest in letting other potential buyers...
SYS-CON Events announced today that T-Mobile will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. As America's Un-carrier, T-Mobile US, Inc., is redefining the way consumers and businesses buy wireless services through leading product and service innovation. The Company's advanced nationwide 4G LTE network delivers outstanding wireless experiences to 67.4 million customers who are unwilling to compromise on ...
SYS-CON Events announced today that Infranics will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Since 2000, Infranics has developed SysMaster Suite, which is required for the stable and efficient management of ICT infrastructure. The ICT management solution developed and provided by Infranics continues to add intelligence to the ICT infrastructure through the IMC (Infra Management Cycle) based on mathemat...
SYS-CON Events announced today that SD Times | BZ Media has been named “Media Sponsor” of SYS-CON's 20th International Cloud Expo, which will take place on June 6–8, 2017, at the Javits Center in New York City, NY. BZ Media LLC is a high-tech media company that produces technical conferences and expositions, and publishes a magazine, newsletters and websites in the software development, SharePoint, mobile development and commercial UAV markets.
SYS-CON Events announced today that Telecom Reseller has been named “Media Sponsor” of SYS-CON's 20th International Cloud Expo, which will take place on June 6–8, 2017, at the Javits Center in New York City, NY. Telecom Reseller reports on Unified Communications, UCaaS, BPaaS for enterprise and SMBs. They report extensively on both customer premises based solutions such as IP-PBX as well as cloud based and hosted platforms.
"I think that everyone recognizes that for IoT to really realize its full potential and value that it is about creating ecosystems and marketplaces and that no single vendor is able to support what is required," explained Esmeralda Swartz, VP, Marketing Enterprise and Cloud at Ericsson, in this SYS-CON.tv interview at @ThingsExpo, held June 7-9, 2016, at the Javits Center in New York City, NY.